Door Furniture Direct

Call Us Now 0151 652 3136
Home
Contact Us
Guides & FAQ's
Special Offers New Products
© Copyright DFD
Stainless 19mm Lever Lock Set Grade 316
Stainless steel 19mm lever on lock plate, in pairs. The lever measures 140mm, the back plate measures 178x40mm. Set includes spindle and screws. Satin or Polished finish available (select from the drop down box below). Please note these levers are sprung.

Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the key is turned the deadbolt is operated, locking the door. The handles are supplied complete with the spindle and fixing screws, but not with the lock which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.

Click here for dimensions diagram

    Quantity:  set
Ref: I480040#1
 
 
   All orders are carried out according to standard terms and conditions, click here for details

Home Contact Us Guides & FAQ's Special Offers New Products