These friction pivot hinges, designed for windows, are die-cast and powder coated for corrosion resistance. They measure 190x25mm and open up to 180 degrees. Tensions is achieved by adjusting the screw on the side of the hinge. Sold in pairs, fixings not included. Size 10 wood screws should be used to fix these hinges (Supplied separately).
Spelter galvanized (silver grey finish) tee hinge, in pairs. Available in the following sizes: 6in (150mm), 10in (250mm), 12in (300mm), 14in (350mm), 16in (400mm) and 18in (450mm). Please select the size you require in the drop down box below. Please note the longer hinges (14, 16 and 18in) are heavy, shipping costs will be confirmed by email before delivery. Screws are not supplied with this item and need to be purchased separately, please see our fixings section. The 6in, 10in and 12in hinges all require gauge 10 woodscrews and the 14in, 16in and 18in require gauge 12 woodscrews. Two packets of 10 screws would be sufficient to fix the pair of hinges.