Bright zinc plated fully threaded coach bolt, supplied complete with hexagon nut. Bolt has a 12mm thread and is 75mm in length. Coach bolts have a plain domed head which cannot be tightened with a screwdriver and a square section underneath the head which locates into a square hole and prevents the bolt from shaking loose.
Zinc plated pozi drive countersunk head woodscrews 3/4in long 6 gauge, sold and priced in packs of 10 or a box of 200 only. Please select quantity required from the drop down box below.
Small dowels with a threaded insert to suit a 6mm bolt. Dowel is slotted at one end so when inserted, it can be adjusted with a screwdriver so the bolt holes line up. Dowel length measures 12mm.
Pack of 10 nickel plated surface cup washers to suit a no.12 gauge screw. The cup washer sits on the surface of the material and a countersunk screw is screwed through the centre of the washer until the head is flush with the surface of the cup. Used to increase the bearing area beneath the screw head and to add a more aesthetic appearance to work. Sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 washers).
Pack of 10 Yellow Plated Countersunk Chipboard Screws 4.0x40mm
Hardened zinc yellow passivated pozi drive countersunk head chipboard screws. 4mm gauge, 40mm long, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)
Pack of 10 Chrome Plated Countersunk Wood Screws 1.1/2in x 10g
Chrome plated on brass slotted countersunk head woodscrews 1.1/2in long 10 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)