Spindles
Bell Push and Bells
Cabin Hooks
Cabinet Fittings
Cabinet Handles
Cabinet Knobs
Cleat Hooks
Coat Hooks
Curtain Tie Backs
Cylinder Lock Covers
Cylinder Locks
Digital Locks
Door Bolts
Door Closers Selectors and Stays
Door Holders
Door Knobs
Door Knocker
Door Latches
Door Lever Handles
Door Pulls
Door Security
Door Stops
Door Studs
Door Thresholds
Draught Excluder
Electrical Fittings
Escutcheons
Exit Panic Hardware
Finger Plates
Fireside Accessories
Fixing Tools
Fixings
Flush Door Handles
Gate Fittings
Grab Rails
Handrail Brackets
Hinges
Hooks and Screw Eyes
House Numbers Letters
Letter Box
Maintenance and Repair
Mortice latches
Mortice Locks
Multipoint Door Handles
Name Plates
Nightlatches and Yale Locks
Padlocks and Hasps
Pull Handles
Rim Locks
Rope Chain and Accs
Shelving
Signs
Spindles
Toilet Roll Holders
Trunk Box and Case Fittings
Vents
Window Furniture
Window Security
Product Range
/
Spindles
- Page 1 of 1
Click to view ALL
Spindles
Plain Spindle 82mm
Plain spindle (82mm) for use with door furniture. This spindle is unsuitable for rim furniture.
£ 0.81 inc. VAT
Quantity:
each
Ref:
S084100
Click to view ALL
Spindles
Plain Spindle 140mm
Plain spindle (140mm) for use with door furniture. This spindle is unsuitable for rim furniture.
£ 1.05 inc. VAT
Quantity:
each
Ref:
S084200
Click to view ALL
Spindles
Drilled Spindle 106mm
Drilled spindle (106mm). Suitable for use where fixing is by a grub screw or similar inserted throught the spindle, into the neck of the door furniture. Please note that this spindle is drilled only and not tapped with any thread. It may be necessary to tap a suitable thread should your handles require this.
£ 3.55 inc. VAT
Quantity:
each
Ref:
S084300
To send details of the
Drilled Spindle 106mm
to a friend, please complete the boxes and click send.
*
Mandatory
Your Name
*
Your Email
*
Friends Name
*
Friends Email
*
Your Privacy - The information entered above is not retained by our system nor passed to any third parties.
Click to view ALL
Spindles
Drilled and Tapped Spindle 126mm
Drilled and tapped spindle (126mm). Suitable for use where fixing is by a grub screw inserted throught the spindle, into the neck of the door furniture. Spindle is tapped 3/16in Whitworth thread.
£ 4.09 inc. VAT
Quantity:
each
Ref:
S084400
Click to view ALL
Spindles
Taylors Spindle
Taylors spindles are used for fitting door knobs where the knob is not required to turn to operate a latch or lock. Therefore the knob would be a dummy knob, just being used to pull the door open. The spindle is screwed to the surface of the door and the door knob fitted onto it.
£ 3.41 inc. VAT
Quantity:
each
Ref:
S084410
Click to view ALL
Spindles
Slotted Spindle 8mm x 90mm
Slotted spindle, 8mm square and 90mm long. For use with door furniture using this type of spindle to secure the lever.
£ 2.82 inc. VAT
Quantity:
each
Ref:
I409810
Click to view ALL
Spindles
Bathroom Spindle 5mm
Bathroom spindle, 5mm square and approximately 75mm long. For use with bathroom mortice locks, bathroom furniture and turn and releases.
£ 0.41 inc. VAT
Quantity:
each
Ref:
I409800
Click to view ALL
Spindles
Split Spindle 120mm
Split spindle (120mm). For use with special controlled locks/latches on doors where the handles are required to operate independently of each other.
£ 6.90 inc. VAT
Quantity:
each
Ref:
I343965
All orders are carried out according to standard terms and conditions,
click here for details
Orders Over £100.00
Your Trolley Is Empty
Ashley Bathroom Handles
£21.78
Ashley Lever Latch Handles
£15.25
Ashley Lever Lock Handles
£15.25
Barbican Georgian Finger Plate
£5.85
Barbican Victorian 7.1/4in Pull Handle
£8.65
www.bernards.co.uk
Home
Contact Us
Guides & FAQ's
Special Offers
New Products
