Fixings
Bell Push and Bells
Cabin Hooks
Cabinet Fittings
Cabinet Handles
Cabinet Knobs
Cleat Hooks
Coat Hooks
Curtain Tie Backs
Cylinder Lock Covers
Cylinder Locks
Digital Locks
Door Bolts
Door Closers Selectors and Stays
Door Holders
Door Knobs
Door Knocker
Door Latches
Door Lever Handles
Door Pulls
Door Security
Door Stops
Door Studs
Door Thresholds
Draught Excluder
Electrical Fittings
Escutcheons
Exit Panic Hardware
Finger Plates
Fireside Accessories
Fixing Tools
Fixings
Flush Door Handles
Gate Fittings
Grab Rails
Handrail Brackets
Hinges
Hooks and Screw Eyes
House Numbers Letters
Letter Box
Maintenance and Repair
Mortice latches
Mortice Locks
Multipoint Door Handles
Name Plates
Nightlatches and Yale Locks
Padlocks and Hasps
Pull Handles
Rim Locks
Rope Chain and Accs
Shelving
Signs
Spindles
Toilet Roll Holders
Trunk Box and Case Fittings
Vents
Window Furniture
Window Security
Product Range
/
Fixings
- Page 7 of 21
Click to view ALL
Wall Plugs
Pack of 40 General Purpose Wall Fixings
Pack of 40 general purpose concrete and brick wall plugs. Should be used in conjunction with a 6mm masonry drill bit and no.6, 8,10 or 12 gauge screws.
£ 0.73 inc. VAT
Quantity:
each
Ref:
5010047106004
Click to view ALL
Screw Cover Caps
Pack of 10 Plastidome Caps Light Brown
Light brown plastic screw cover caps to take a 6 or an 8 gauge screw. Supplied with a plastic washer into which the screw is inserted and then the cover clips over the top concealing the head of the screw. Sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 caps and washers).
£ 1.66 inc. VAT
Quantity:
pack of 10
Ref:
F387090
Click to view ALL
Coverhead Screws
Mirror Screws Chrome 2x8g
Brass tapped countersunk screw 2in long, 8 gauge. Supplied complete with screw in chrome dome coverhead.
£ 0.67 inc. VAT
Quantity:
each
Ref:
F221400
Click to view ALL
Cup Washers
Pack of 10 Surface Cup Washers Nickel No.6
Pack of 10 nickel plated surface cup washers to suit a no.6 gauge screw. The cup washer sits on the surface of the material and a countersunk screw is screwed through the centre of the washer until the head is flush with the surface of the cup. Used to increase the bearing area beneath the screw head and to add a more aesthetic appearance to work. Sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 washers).
£ 0.73 inc. VAT
Quantity:
pack of 10
Ref:
F387340
Click to view ALL
Chipboard Screws
Pack of 10 Yellow Plated Countersunk Chipboard Screws 3.5x40mm
Hardened zinc yellow passivated pozi drive countersunk head chipboard screws. 3.5mm gauge, 40mm long, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)
£ 0.38 inc. VAT
Quantity:
pack of 10
Ref:
F381190
Click to view ALL
Chrome Plated Wood Screws
Pack of 10 Chrome Plated Countersunk Wood Screws 1.1/2in x 8g
Chrome plated on brass slotted countersunk head woodscrews 1.1/2in long 8 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)
£ 2.43 inc. VAT
Quantity:
pack of 10
Ref:
F321610
Click to view ALL
Bronze Wood Screws
Pack of 10 Bronze Countersunk Wood Screws 1.1/2in x 8g
Bronze slotted countersunk head woodscrews 1.1/2in long 8 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)
£ 1.01 inc. VAT
Quantity:
pack of 10
Ref:
F352600
Click to view ALL
Japanned Wood Screws
Pack of 10 Japanned Round Head Wood Screws 1in x 10g
Black japanned round head woodscrews 1in long 10 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)
£ 0.80 inc. VAT
Quantity:
pack of 10
Ref:
F312200
Click to view ALL
Fixings
White Inter Screws
White plastic inter screws. One end of the cap is fitted with a threaded bolt and the other cap has an internal thread allowing the two halves to screw together. Both caps have slots in the head for adjustment with a screwdriver. When fully tightened, the distance between the two heads is 26mm. These screws are most commomly used for connecting kitchen cabinets, suitable for use with 15-17mm board.
£ 0.26 inc. VAT
Quantity:
each
Ref:
I323100
Click to view ALL
Coach Bolts and Nuts
Coach Bolt and Nut BZP M10x130mm
Bright zinc plated fully threaded coach bolt, supplied complete with hexagon nut. Bolt has a 10mm thread and is 130mm in length. Coach bolts have a plain domed head which cannot be tightened with a screwdriver and a square section underneath the head which locates into a square hole and prevents the bolt from shaking loose.
£ 1.54 inc. VAT
Quantity:
each
Ref:
F109700
Product Range
/
Fixings
- Page 7 of 21
Further pages with :
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
All orders are carried out according to standard terms and conditions,
click here for details
Orders Over £100.00
Your Trolley Is Empty
Ashley Bathroom Handles
£21.78
Ashley Lever Latch Handles
£15.25
Ashley Lever Lock Handles
£15.25
Barbican Georgian Finger Plate
£5.85
Barbican Victorian 7.1/4in Pull Handle
£8.65
www.bernards.co.uk
Home
Contact Us
Guides & FAQ's
Special Offers
New Products
