Spindles
Bell Push and Bells
Cabin Hooks
Cabinet Fittings
Cabinet Handles
Cabinet Knobs
Cleat Hooks
Coat Hooks
Curtain Tie Backs
Cylinder Lock Covers
Cylinder Locks
Digital Locks
Door Bolts
Door Closers Selectors and Stays
Door Holders
Door Knobs
Door Knocker
Door Latches
Door Lever Handles
Door Pulls
Door Security
Door Stops
Door Studs
Door Thresholds
Draught Excluder
Electrical Fittings
Escutcheons
Exit Panic Hardware
Finger Plates
Fireside Accessories
Fixing Tools
Fixings
Flush Door Handles
Gate Fittings
Grab Rails
Handrail Brackets
Hinges
Hooks and Screw Eyes
House Numbers Letters
Letter Box
Maintenance and Repair
Mortice latches
Mortice Locks
Multipoint Door Handles
Name Plates
Nightlatches and Yale Locks
Padlocks and Hasps
Pull Handles
Rim Locks
Rope Chain and Accs
Shelving
Signs
Spindles
Toilet Roll Holders
Trunk Box and Case Fittings
Vents
Window Furniture
Window Security
Product Range
/
Spindles
- Page 1 of 2
Click to view ALL
Spindles
Plain Spindle 82mm
Plain spindle (82mm minimum) for use with door handles (unsuitable for rim furniture). The spindle may need to be cut down in size to suit the door thickness and supplied sizes may vary in excess of 82mm. Spindle measures approximately 7.6mm square.
£ 0.81 inc. VAT
Quantity:
each
Ref:
S084100
Click to view ALL
Spindles
Plain Spindle 140mm
Plain spindle (140mm minimum) for use with door handles (unsuitable for rim furniture). The spindle may need to be cut down in size to suit the door thickness and supplied sizes may vary in excess of 140mm. Spindle measures approximately 7.6mm square.
£ 1.05 inc. VAT
Quantity:
each
Ref:
S084200
Click to view ALL
Spindles
Drilled Spindle 106mm
Drilled spindle approximately 106mm. Suitable for use where fixing is by a grub screw or similar inserted throught the spindle, into the neck of the door furniture. Please note that this spindle is drilled only and not tapped with any thread. It may be necessary to tap a suitable thread should your handles require this.
£ 3.55 inc. VAT
Quantity:
each
Ref:
S084300
Click to view ALL
Spindles
Drilled and Tapped Spindle 126mm
Drilled and tapped spindle approximately 126mm long. Suitable for use where fixing is by a grub screw inserted throught the spindle, into the neck of the door furniture. Spindle is tapped 3/16in Whitworth thread.
£ 4.30 inc. VAT
Quantity:
each
Ref:
S084400
Click to view ALL
Spindles
Taylors Spindle 7.6mm
Taylors spindles are used for fitting door knobs where the knob is not required to turn to operate a latch or lock. Therefore the knob would be a dummy knob, just being used to pull the door open. The spindle is screwed to the surface of the door and the door knob fitted onto it. Approximate dimensions: Fixing plate is 25mm diameter with spindle length 19.5mm and 7.6mm square.
£ 3.58 inc. VAT
Quantity:
each
Ref:
S084410
Click to view ALL
Spindles
Dummy 8mm Spindle for Round Rose Levers
Zinc plated dummy spindle for use with round rose levers. This spindle is used for fitting door levers where the lever is not required to turn to operate a latch or lock. Therefore the lever would just be used to pull the door open. The spindle is screwed to the surface of the door and the door lever fitted onto it. Approximate dimensions: Fixing plate is 35mm diameter with spindle length 40mm and 8mm square.
£ 2.51 inc. VAT
Quantity:
each
Ref:
I432685
Click to view ALL
Spindles
Dummy Tapered Spindle for China Mortice Knobs
Zinc plated dummy tapered spindle for use with china (porcelain) mortice knobs. The spindle is tapered on one face and so it is necessary to ensure that the porcelain knobs to be fitted use this type of tapered spindle. Used for fitting door knobs where the knob is not required to turn to operate a latch or lock. Therefore the knob would be a dummy knob, just being used to pull the door open. The spindle is screwed to the surface of the door and the china knob fitted onto it. Approximate dimensions: Fixing plate is 35mm diameter with spindle length 35mm and tapered.
£ 3.38 inc. VAT
Quantity:
each
Ref:
I432690
Click to view ALL
Spindles
8mm Slotted Spindle
Slotted spindle, 8mm square and available in two lengths, 100mm and 110mm. For use with door furniture using this type of spindle to secure the lever. Please select size required from the drop down box below.
£ 1.94 inc. VAT
Quantity:
each
100mm
110mm
Ref:
I432700#05
Click to view ALL
Spindles
Split Spindle 110mm
Split spindle approximately 110mm. For use with special controlled locks/latches on doors where the handles are required to operate independently of each other (split follower).
£ 7.59 inc. VAT
Quantity:
each
Ref:
I343965
Click to view ALL
Spindles
Bathroom Spindle 5mm x 75mm
Bathroom spindle, 5mm square and approximately 75mm long. For use with bathroom mortice locks, bathroom furniture and turn and releases.
£ 0.41 inc. VAT
Quantity:
each
Ref:
I409800
Product Range
/
Spindles
- Page 1 of 2
Further pages with :
1
2
All orders are carried out according to standard terms and conditions,
click here for details
Orders Over £50.00
Your Trolley Is Empty
Chelsea Flower Finger Plate
£11.99
Frosted Glass Ball Mortice Door Knobs
£25.23
Glass Ball Mortice Door Knobs
£25.23
Glass Cut Mortice Door Knobs
£25.23
Glass Pumpkin Mortice Door Knobs
£29.08
www.bernards.co.uk
Home
Contact Us
Guides & FAQ's
Special Offers
New Products
