Henderson Type Garage Door Lock Handle 032085
£33.54 £27.95 Each
This handle is for pre-premiere Henderson garage doors. Spindle is 8mm square and length measures 70mm. Lugs are 35mm in length and the distance between the two fixings is approximately 52mm. Lugs and spindle can both be cut down if necessary to suit. Supplied complete with fitting instructions.
To fit this lock you must first remove the two screws from the rear of the lock to be replaced and remove the old lock from assembly. The square spigot and screws should be cut to match those on the lock that has been removed. Fit the new lock with the Henderson name uppermost and replace the two screws to secure the lock to the door.
|Manufacturer||Door Furniture Direct|
Write Your Own Review