Howard Curved Lever Brass and Bronze Keyhole Door Handles
£23.36 £19.47 Pair
Howard Patina mixed brass and bronzed curved lever handle on a shaped keyhole backplate. Used on doors that have a mortice door lock operated with a key. The backplate measures 171x48mm and this set is supplied complete with connecting spindle and fixing screws.
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The handles are supplied complete with the spindle and fixing screws, but not the lock which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.
|Dimensions||Overall Back Plate Dimensions 171x48mm
Lever Length 109mm
Overall Projection 53mm
Back Plate Thickness 9mm
Approximate dimensions subject to change by the manufacturer, please contact us if this information is critical.