Howard Curved Lever Polished Brass Keyhole Door Handles
Howard polished brass curved lever handle on a shaped keyhole backplate. Used on doors that have a mortice door lock operated with a key. The backplate measures 171x48mm and this set is supplied complete with connecting spindle and fixing screws. These brass locking door handles are typically fitted in conjunction with a York brass mortice sashlock, see related items below.
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The handles are supplied complete with the spindle and fixing screws, but not the lock which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.
|Dimensions||Overall Back Plate Dimensions 171x48mm|
Lever Length 109mm
Overall Projection 53mm
Back Plate Thickness 9mm
Approximate dimensions subject to change by the manufacturer, please contact us if this information is critical.