Brass Ring Door Knocker 134mm
Polished brass heavy ring door knocker with an outside diameter measurement of approximately 134mm. Fixing rose measures approximately 78.5mm in diameter. Supplied complete with two fixing bolts and brass dome nuts, one for the knocker and the other for the striking plate. Typically fitted to a front door with other polished brass front door furniture.
This door knocker consists of a large ring hinged to a back plate and fitted so that it strikes a separate plate to indicate that attention is needed at the door. A door knocker can be used just for aesthetic reasons if fitted with a door bell or can be used to assist in pulling the door closed. It is fixed by means of an 8mm threaded bar which passes through the door and screws into the back of the door knocker. A dome nut to match the finish of the knocker is then fitted to the other end of the bar until it is flush with the inside face of the door. Useful fixing tools: 8mm wood drill.