Windsor Straight Lever Polished Brass Long Plate Latch Door Handles

£24.89 £20.74 Pair
SKU
I435315

Windsor polished brass straight lever latch handle on a plain backplate. Used on doors that have a mortice latch and are NOT required to lock with a key. The long backplate measures 154x40mm and this set is supplied complete with connecting spindle and fixing screws. These traditional door handles should be fitted in conjunction with a York brass finish tubular latch, see related items below.

Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch allowing the door to open. The handles are supplied complete with the spindle and fixing screws, but not with the latch, which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.

Recommended latches shown are suitable for typical domestic use. Please refer to our mortice latch category for alternative heavier duty latches as used on commercial applications, or where a heavy duty product is required. A 2.5in (64mm) latch is normally recommended for lever handles.

More Information
Price Unitpair
ModelV713-PB
SKUI435315
DimensionsOverall Back Plate Dimensions 154x40mm
Lever Length 102mm
Overall Projection 54mm
Back Plate Thickness 10mm
Approximate dimensions subject to change by the manufacturer, please contact us if this information is critical.
ManufacturerM.Marcus
Copyright © 2019 - Door Furniture Direct. All Rights Reserved.